CFD with OpenFoam
CFD Simulation with OpenFoam
In this tutorial we are using Helyx as a front end for OpenFoam. The complete workflow is displayed, from the CAD, Helyx to the postprocessing with Paraview. The video focus’ on a one inlet/multi outlet problem, where it is not clear how much water will flow out of the every opening.
The boundary condition are set to the following values:
- outlet:
- velocity: “pressure inlet outlet velocity”
- pressure: “total pressure” = 0
- inlet:
- velocity: “volumetric flow rate inlet” = 0.1
- pressure: zero gradient
If you have questions or critique than please leave a comment on the video at youtube.
All necessary files can be downloaded from the link below.
By loading the video, you agree to YouTube's privacy policy.
Learn more
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
